Downloads

We stock and supply a comprehensive range of sheets, plates, rods and profiles made of aluminum, steels and heavy metals such as brass, copper and bronze. It includes numerous products and alloys for different applications in various industries such as automotive, mechanical engineering, architecture and art. If required, we can also supply unusual dimensions. In order to be able to meet your requirements at all times, we are constantly updating and expanding our stock.

All data sheets

ALPLAN face-milled rolled sheet EN AW-5083 (61 KB | pdf)ALPLAN face-milled rolled sheet EN AW-5083(61 KB | pdf)
Main area of application: Fixture construction, mold making
Typical delivery form: Sheets
Alumold 1 (similar to AlZn5.5MgCu) (119 KB | pdf)Alumold 1 (similar to AlZn5.5MgCu)(119 KB | pdf)
Main area of application: Mold making
Typical delivery form: Blocks and sheets
Carbon steel (C45W) 1.1730 o.1.1191 (72 KB | pdf)Carbon steel (C45W) 1.1730 o.1.1191(72 KB | pdf)
Main area of application: Fixture construction, base and table tops
Special feature: Material normalized, thickness milled
Typical delivery form: Boards
CK 45 (C45E or C45W) 1.1191 or 1.1730 (73 KB | pdf)CK 45 (C45E or C45W) 1.1191 or 1.1730(73 KB | pdf)
Main area of application: Base plate, table top, straightening plate, gauges, fixtures
Special feature: Specially stress-relieved, thickness ground
Typical delivery form: Plates
CW004A (Cu-ETP – 2.0065) (62 KB | pdf)CW004A (Cu-ETP – 2.0065)(62 KB | pdf)
This alloy is mainly used in electrical engineering due to its high conductive properties.
CW008A (Cu-OF – 2.0040) (63 KB | pdf)CW008A (Cu-OF – 2.0040)(63 KB | pdf)
This alloy is also mainly used in electrical engineering due to its high conductive properties.
CW021A (Cu-HCP – 2.0070) (63 KB | pdf)CW021A (Cu-HCP – 2.0070)(63 KB | pdf)
Mainly used for components in electrical engineering and electronics (cable tape, welded cables) and as a cladding material.
CW024A (Cu-DHP – 2.0090) (991 KB | pdf)CW024A (Cu-DHP – 2.0090)(991 KB | pdf)
The main areas of application are pipelines, roof and wall cladding (construction industry) and apparatus engineering.
CW101C (CuBe2 – 2.1247) (493 B)CW101C (CuBe2 – 2.1247)(493 B)
CW103C (CuCo1Ni1Be) (63 KB | pdf)CW103C (CuCo1Ni1Be)(63 KB | pdf)
CW103C is the preferred electrode material for various welding processes, especially for stainless steels.
CW104C (CuCo2Be – 2.1285) (62 KB | pdf)CW104C (CuCo2Be – 2.1285)(62 KB | pdf)
Mainly used for spot welding electrodes, grid welding electrodes, electrode holders and roller seam electrodes for stainless steel and nickel alloys.
CW106C (CuCr1Zr – 2.1293) (63 KB | pdf)CW106C (CuCr1Zr – 2.1293)(63 KB | pdf)
Mainly used in electrical engineering and mechanical engineering as a contact material and current-carrying springs, in welding and soldering technology and in appliance construction.
CW111C (CuNi2Si – 2.0855) (62 KB | pdf)CW111C (CuNi2Si – 2.0855)(62 KB | pdf)
Often used for pistons in cold chamber die casting machines, electrode holders for resistance welding technology, nozzles for submerged arc welding systems, as well as for ejector pins in plastic mold construction.
CW118C (CuTeP – 2.1546) (71 KB | pdf)CW118C (CuTeP – 2.1546)(71 KB | pdf)
Used particularly in electronics and electrical engineering, e.g. for contacts, but also for welding torch nozzles and screws.
CW502L (CuZn15 – 2.0240) (61 KB | pdf)CW502L (CuZn15 – 2.0240)(61 KB | pdf)
The alloy is used for architectural, stamped and deep-drawn parts. It is also used in jewelry production, cosmetics packaging and components in electrical engineering and mechanical engineering.
CW508L (CuZn37 – 2.0321) (29 KB | pdf)CW508L (CuZn37 – 2.0321)(29 KB | pdf)
Like CW502L, CW508L is ideal for cold forming, although slightly worse due to the higher zinc content, but still almost identical.
CW602N (CuZn36Pb2As) (943 KB | pdf)CW602N (CuZn36Pb2As)(943 KB | pdf)
CW602N is used for industrial and household fittings, especially for pipe connectors, is highly resistant to dezincification and is easy to cold form.
CW603N (CuZn36Pb3 – 2.0375) (942 KB | pdf)CW603N (CuZn36Pb3 – 2.0375)(942 KB | pdf)
This alloy is mainly used in mechanical engineering in the USA.
CW608N (CuZn38Pb2 – 2.0371) (953 KB | pdf)CW608N (CuZn38Pb2 – 2.0371)(953 KB | pdf)
Used in the metal industry for a variety of products, especially for precision mechanical and optical devices, watch parts and fittings.
CW612N (CuZn39Pb2 – 2.0380) (943 KB | pdf)CW612N (CuZn39Pb2 – 2.0380)(943 KB | pdf)
Like CW614N, CW612N is often used for machining and is very suitable for hot forming and forging.
CW614N (CuZn39Pb3 – 2.0401) (957 KB | pdf)CW614N (CuZn39Pb3 – 2.0401)(957 KB | pdf)
Main alloy for machining. This brass is particularly suitable for automatic machines and can also be formed very well when hot.
CW617N (CuZn40Pb2 – 2.0402) (63 KB | pdf)CW617N (CuZn40Pb2 – 2.0402)(63 KB | pdf)
Mainly used in electrical engineering and the optical industry, including for fittings and model railroads.
CW624N (CuZn43Pb2Al – 2.0410) (841 KB | pdf)CW624N (CuZn43Pb2Al – 2.0410)(841 KB | pdf)
This alloy is often used for profiles with thin walls or complex geometries.
CW710R (CuZn35Ni3Mn2AlPb – 2.0540) (852 KB | pdf)CW710R (CuZn35Ni3Mn2AlPb – 2.0540)(852 KB | pdf)
Not specified.
CW713R (CuZn37Mn3Al2PbSi – 2.0550) (939 KB | pdf)CW713R (CuZn37Mn3Al2PbSi – 2.0550)(939 KB | pdf)
It is characterized by high wear resistance and good hot formability and is used in the mechanical engineering and automotive sectors.
EC 80 Case-hardening steel (16MnCr5) 1.7131 (73 KB | pdf)EC 80 Case-hardening steel (16MnCr5) 1.7131(73 KB | pdf)
Main area of application: Sliders, connecting rods, sliding rods, fixture base plates
Special feature: Specially stress-relieved, thickness ground
Typical delivery form: Plates
EN AW-1350A (Al99.5 – 3.0257) (493 B)EN AW-1350A (Al99.5 – 3.0257)(493 B)
Main area of application: Busbars, electrical engineering
EN AW-2007 (AlCu4PBMgMN – 3.1645) (834 KB | pdf)EN AW-2007 (AlCu4PBMgMN – 3.1645)(834 KB | pdf)
Main area of application: Automatic turned parts
Trade names: AlCuMgPb, major aluminum, drilling and turning quality
Typical delivery form: Bars
EN AW-2011 (AlCu6BiPb – 3.1655) (833 KB | pdf)EN AW-2011 (AlCu6BiPb – 3.1655)(833 KB | pdf)
Main area of application: Automatic turned parts
Trade names: AlCuBiPb, Aludur
Typical delivery form: Bars
EN AW-2014 (AlCu4SiMg – 3.1255) (69 KB | pdf)EN AW-2014 (AlCu4SiMg – 3.1255)(69 KB | pdf)
Forgings for high loads. Artificially aged condition = sufficient corrosion resistance / reduction of residual stresses.

EN AW-2017A (AlCu4MgSi – 3.1325) (126 KB | pdf)EN AW-2017A (AlCu4MgSi – 3.1325)(126 KB | pdf)
Main area of application: Aviation, transportation and traffic
Trade names: AlCuMg 1
Typical delivery form: Sheets, plates and rods
EN AW-2024 (AlCu4Mg1 – 3.1355) (122 KB | pdf)EN AW-2024 (AlCu4Mg1 – 3.1355)(122 KB | pdf)
Main area of application: Aviation, transportation and traffic
Trade names: AlCuMg 1
Typical delivery form: Sheets, plates and rods
EN AW-3005 (AlMn1Mg0.5 – 3.0525) EN AW-3005 (AlMn1Mg0.5 – 3.0525)
Main applications: Roof covering and wall cladding, antennas, ladders, stairs, roller blinds, thermal insulation.
Typical delivery form: Good mechanical properties combined with good corrosion properties and formability.
EN AW-5005 (Al Mg1 – 3.3315) (119 KB | pdf)EN AW-5005 (Al Mg1 – 3.3315)(119 KB | pdf)
Main areas of application: Metal construction, signs, architecture
Trade names: AlMg1, anodized sheet, EA or EB sheet, Peraluman-100
Typical delivery form: Sheets
EN AW-5019 (AlMg5 – 3.3555) EN AW-5019 (AlMg5 – 3.3555)
Main area of application: Automatically turned parts for precision mechanics and optics.
Predominantly anodized and dyed or hard anodized. Screws, bolts and pins for mechanical engineering.
Typical delivery form: Wire products of all kinds, nails.
EN AW-5083 (AlMg4.5Mn0.7 – 3.3547) (122 KB | pdf)EN AW-5083 (AlMg4.5Mn0.7 – 3.3547)(122 KB | pdf)
Main area of application: Machine, vehicle, ship and container construction
Trade names: AlMg4.5 Mn, Peraluman-460
Typical delivery form: Sheets, plates, rods and profiles
EN AW-5083 (AlMg4.5Mn0.7 – 3547) face-milled cast plate (61 KB | pdf)EN AW-5083 (AlMg4.5Mn0.7 – 3547) face-milled cast plate(61 KB | pdf)
Main area of application: Jig and fixture construction, mold making
Trade names: Plancast, ACP5080, Planal
Typical delivery form: Blocks and sheets
EN AW-5454 (AlMg3Mn – 3.3537) (122 KB | pdf)EN AW-5454 (AlMg3Mn – 3.3537)(122 KB | pdf)
Used explicitly for pressurized gas tanks. Structural stability at elevated continuous operating temperatures.
EN AW-5754 (Al Mg 3 – 3.3535) (129 KB | pdf)EN AW-5754 (Al Mg 3 – 3.3535)(129 KB | pdf)
Main areas of application: Machine, vehicle, ship and container construction
Trade names: AlMg 3, Peraluman-300
Typical delivery form: Sheets, plates, rods and profiles
EN AW-6012 (AlMgSiPb – 3.0615) (927 KB | pdf)EN AW-6012 (AlMgSiPb – 3.0615)(927 KB | pdf)
This alloy is used in the broadest sense for parts in mechanical engineering. It is a cold and hot-work hardened free-cutting alloy (drilling and turning quality) of medium strength.
EN AW-6023 (AlSi1Sn1MgBi) (63 KB | pdf)EN AW-6023 (AlSi1Sn1MgBi)(63 KB | pdf)
Specially developed for applications in the electronics and automotive industries and known for its good machining and anodizing properties.
EN AW-6026 (AlMgSiBi) (868 KB | pdf)EN AW-6026 (AlMgSiBi)(868 KB | pdf)
This alloy was developed for automotive applications and is known for its good machining and anodizing properties.
EN AW-6060 (AlMgSi – 3.3206) (122 KB | pdf)EN AW-6060 (AlMgSi – 3.3206)(122 KB | pdf)
Main area of application: Classic standard profile alloy
Trade names: AlMgSi0.5, Extrudal-050
Typical delivery form: Profiles
EN AW-6061 (AlMg1SiCu – 3.3214) (139 KB | pdf)EN AW-6061 (AlMg1SiCu – 3.3214)(139 KB | pdf)
Used for parts in the aviation industry and in the USA instead of EN AW-6082. Also used for pressure vessels, particularly in the USA.
EN AW-6082 (AlMgSi1 – 3.2315) (63 KB | pdf)EN AW-6082 (AlMgSi1 – 3.2315)(63 KB | pdf)
Main areas of application: Food industry, automotive, electrical engineering
Trade names: AlMgSi1
Typical delivery form: Sheets, plates, rods and profiles
EN AW-7020 (AlZn4.5Mg1 – 3.4335) (121 KB | pdf)EN AW-7020 (AlZn4.5Mg1 – 3.4335)(121 KB | pdf)
Main areas of application: Vehicle construction, load-bearing structures, welded parts
Trade names: AlZn4.5Mg1
Typical delivery form: Sheets and plates, thick rods
EN AW-7021 Plancast plus (932 KB | pdf)EN AW-7021 Plancast plus(932 KB | pdf)
Main area of application: Fixture construction, mold making
Typical delivery form: Blocks and sheets
EN AW-7022 (AlZn5Mg3Cu – 3.4345) (122 KB | pdf)EN AW-7022 (AlZn5Mg3Cu – 3.4345)(122 KB | pdf)
Main areas of application: Aviation, mechanical engineering, fixture construction
Trade names: AlZnMgCu0.5, Certal
Typical delivery form: Sheets, plates and rods
EN AW-7075 (AlZn5.5MgCu – 3.4365) (124 KB | pdf)EN AW-7075 (AlZn5.5MgCu – 3.4365)(124 KB | pdf)
Main areas of application: Aerospace, mechanical engineering, fixture construction
Trade names: AlZnMgCu1.5
Typical delivery form: Sheets, plates and rods
Flat steel (S355J2G3) 1.0570 (73 KB | pdf)Flat steel (S355J2G3) 1.0570(73 KB | pdf)
(formerly RSt52.3 mild steel normalized)
Main application: Base plate, table top, mounting and cladding plates
Special feature: Material normalized, thickness ground
Typical delivery form: Plates
Hokotol (80 KB | pdf)Hokotol(80 KB | pdf)
Main area of application: Fixture construction, mold making, tool making
Typical delivery form: Blocks and sheets
Material overview aluminium (193 KB | pdf)
All commercially available aluminium alloys in a clearly arranged form.
Material overview steel (86 KB | pdf)
All stocked steel alloys in a clearly arranged form.
Material states for aluminium (79 KB | pdf)
Designation of the material states for aluminium according to DIN EN 515
Stainless steel V2A (1.4301) (73 KB | pdf)Stainless steel V2A (1.4301)(73 KB | pdf)
Main area of application: Molded parts, machine parts, cladding and base plates
Special feature: Thickness ground, length and width sawn
Typical delivery form: Sheets
Stainless steel V4A (1.4435) (71 KB | pdf)Stainless steel V4A (1.4435)(71 KB | pdf)
Main area of application: Molded parts, machine parts, cladding and base plates
Special feature: Thickness ground, length and width sawn
Typical delivery form: Sheets
UNIDAL face milling machine Rolling plate EN AW-7019 UNIDAL face milling machine Rolling plate EN AW-7019
Main area of application: Transfer plates, welded constructions
Typical delivery form: Sheets
Weldural (AlCu6.5Mn0.3) (74 KB | pdf)Weldural (AlCu6.5Mn0.3)(74 KB | pdf)
Main area of application: Fixture construction, mold making, tool making
Typical delivery form: Blocks and sheets

Do you need sheet metal,
plates or profiles cut to size?

Let us create a suitable offer for you now.

Andreas Thoma

Sales manager

T +49 821 279 79 – 040
E a.thoma@batz-burgel.com

Request via WhatsApp

Send us your sketch via WhatsApp at: +49 (0) 151 644 43217

Downloads

All data sheets

Do you need sheet metal, plates or profiles cut to size?

Andreas Thoma

Do you need sheet metal,
plates or profiles cut to size?