1. chemical composition of EN AW-1350A

according to DIN EN 573-3 (in % of mass, rest AL)

Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Remark	Other elements
0,25	0,40	0,02	–	0,05	–	0,05	–		0,03

2. Mechanical properties of EN AW-1350A

according to DIN EN 485-2 Sheets and plates (common conditions)

Condition	Nominal thickness		Tensile strength		Yield point		Elongation at break		Hardness
	in mm		Rm in MPa		Rp0.2 in MPa		in % (min.)		HBS
		to	min	max	min	max	A50	A
0/H111/H1112		40	60	–	20	–	22	25	20
H14		40	100	140	70	–	5	6	33
H16		15	125	165	105	–	3	4	38

Physical properties		General properties
(approximate values at 20° C)
Density in g/cm3	2,70	Resistance to:
Solidification range ° C	658	– Sea water	3
Electrical conductivity MS/m	34,5-35,5	– Weather conditions	2
Thermal conductivity W/(mK)	230	Hot formability
Therm. Coefficient of linear expansion 10-6/K	23,5	– Extrusion	1
Modulus of elasticity N/mm2	70.000	– Drop forging	1
Joining work		– Open-die forging	–
Fusion welding		Surface treatment
– Gas	2	Protective anodizing	1
– TIG	2	Anodizing (decorative)	2
– MIG	3	Painting/coating	1
Resistance welding	5
Machinability
– H111	5
– H14	3

3. main application / special features of EN AW-1350A:

Busbars, electrical engineering