x
Do you have any questions? Then please do not hesitate to contact us.

We are here for you. T +49 821 279 79 - 00

    I have read and accepted the data protection declaration.

    You are looking for Sheets, plates, profiles, blanks or milled parts.

    Semi-finished aluminum products
    EN AW-6012 (AlMgSiPb - 3.0615)

    NOT REACH / SVHC KONFORM

    Produktinformation

    Data sheet as PDF

    1. chemical composition of EN AW-6012

    according to DIN EN 573-3 (in % of mass, rest AL)

    Si Fe Cu Mn Mg Cr Zn Ti Pb Other elements
    0,6- 0,5 0,1 0,4- 0,6- 0,3 0,3 0,2 - 0,15
    1,4 1,0 1,2 -

    2. Mechanical properties of EN AW-6012

    DIN EN 755-2 pressed or DIN EN 754-2 drawn bars (common conditions)

    Condition Nominal thickness Tensile strength Yield strength Elongation at break Hardness
    in mm Rm in MPa Rp0.2 in MPa in % (min.) HBS
    about to min max min max A50 A
    Pressed
    T6 - 150 310 - 260 - 8 6 -
    150 200 260 - 200 - 8 - -
    Pulled
    T4 - 80 200 - 100 - 10 8 -
    T6 - 80 310 - 260 - 8 6 -
    Physical properties General properties
    (approximate values at 20° C)
    Density in g/cm3 2,75 Resistance to:
    Solidification range ° C 585-650 - Sea water 3
    Electrical conductivity MS/m 24-32 - Weather conditions 2
    Thermal conductivity W/(mK) 170-220 Hot formability
    Therm. Linear expansion - Extrusion 2
    Coefficient 10-6/K 23,4 - Die forging -
    Modulus of elasticity N/mm2 70.000 - Open-die forging -
    Weldability Surface treatment
    Fusion welding Protective anodizing 3
    - gas - Anodizing (decorative) -
    - TIG 6 Painting/coating 2
    - MIG 6
    Resistance welding 4 Contact with food no
    Machinability
    T4/T6 2

    3. main application / special features of EN AW-6012:

    This alloy is used in the broadest sense for parts in mechanical engineering. It is a cold and hot age-hardened free-cutting alloy (drilling and turning quality) of medium strength with chip-breaking additives (Pb + Bi), which enable trouble-free chip removal even at high chip removal rates.

    Über Batz+Burgel

    „Made in Germany“ seit über 30 Jahren.

    Bei uns treffen hohe Kompetenz und modernste Technik auf zuverlässige Partnerschaft. Wir legen Wert auf höchste Qualität, Präzision und termingerechte Lieferung – zuverlässig und flexibel. Dabei steht der partnerschaftliche und freundliche Umgang mit unseren Kunden und Mitarbeitern immer im Mittelpunkt. Vertrauen Sie auf Batz+Burgel, wenn es um präzise Metallbearbeitung und maßgeschneiderte Lösungen geht. Gemeinsam realisieren wir Ihre Projekte.

    Metallhandel Metallbearbeitung Onlineshop

    Make a specific request now! You will receive your individual offer in just a few minutes.

    If you have any specific questions about the product, please complete the form below or chat directly with our team of advisors.
    We are happy to be there for you on all channels!

    Manuel Knaus

    Manuel Knaus

    Beratung + Verkauf
    Handel und Zuschnitte
    T +49 821 279 79 – 030 E m.knaus@batz-burgel.de

      I would like to contact Batz+Burgel GmbH and agree that my data may be used to process my request and to contact me and that my data and any additional information, documents or files that may have been made available may be stored for the period of time necessary for this purpose. I acknowledge that further information on the subject of data protection can be found in the data protection declaration (click here) and agree to the statements and regulations made there. I acknowledge that I can revoke this agreement at any time and that my revocation will only have legal effect for the future after revocation.

      No file selected (.PDF, .DOC, .JPG, .PNG, .BMP, .DXF, .DWG, .STEP, .STP)

      Request via WhatsApp

      Send us your sketch via WhatsApp at: +49 (0) 151 644 43217