x
Do you have any questions? Then please do not hesitate to contact us.

We are here for you. T +49 821 279 79 - 00

    I have read and accepted the data protection declaration.

    You are looking for Sheets, plates, profiles, blanks or milled parts.

    Semi-finished brass products
    CW602N (CuZn36Pb2As)

    NOT REACH / SVHC KONFORM

    Produktinformation

    Data sheet as PDF

    1. chemical composition of CW602N

    according to DIN EN 13388 (in % of mass)

    Cu Zn Pb Ni Fe Sn Al Ace Remark Other elements
    61,0- Rest 0,17- 0,30 0,10 0,10 0,05 0,02- 0.10%Mn 0,20
    63,0 2,8 0,15

    2. Mechanical properties of CW602N

    according to DIN EN 12449 pipes, 12164/12167/12168 profiles/rods (common condition)

    Condition Nominal thickness Tensile strength Yield point Elongation at break Hardness
    in mm Rm in MPa Rp0.2 in MPa in % (min.) HBS
    about to min max min max A50 A
    A100
    M all as manufactured - without specification of mechanical values
    R280/H070* max. 80 280 - - 200 - 20 30 70-110
    R320//H090* max. 60 320 - 200 - - 10 20 90-135
    R400/H105* max. 10 400 - 250 - - 2 8 105
    Physical properties General properties
    (approximate values at 20° C)
    Density in g/cm3 8,45 Resistance to:
    Solidification range ° C 885-910 - organic substances 2
    Electrical conductivity MS/m 14,5 - Neutral / alkaline compounds 2
    Thermal conductivity W/(mK) 110 Formability
    Therm. Linear expansion - Warm 3
    Coefficient 10-6/K 20,0 - cold 2
    Modulus of elasticity N/mm2 104.000
    Joining work Surface treatment
    - Gas-shielded arc welding 5 Mechanical polishing 2
    - Gas welding 5 Electrolytic polishing 5
    - Resistance welding (butt) 2 Galvanizing 1
    - Brazing 2
    - Soft soldering 1
    Machinability
    Generally 2

    3. main application / special features of CW602N:

    CW602N is used for industrial and household fittings, especially for pipe connectors. This alloy is highly resistant to dezincification and is easy to cold form.

    * The respective maximum available nominal dimension of each state depends on the required shape.

    Über Batz+Burgel

    „Made in Germany“ seit über 30 Jahren.

    Bei uns treffen hohe Kompetenz und modernste Technik auf zuverlässige Partnerschaft. Wir legen Wert auf höchste Qualität, Präzision und termingerechte Lieferung – zuverlässig und flexibel. Dabei steht der partnerschaftliche und freundliche Umgang mit unseren Kunden und Mitarbeitern immer im Mittelpunkt. Vertrauen Sie auf Batz+Burgel, wenn es um präzise Metallbearbeitung und maßgeschneiderte Lösungen geht. Gemeinsam realisieren wir Ihre Projekte.

    Metallhandel Metallbearbeitung Onlineshop

    Make a specific request now! You will receive your individual offer in just a few minutes.

    If you have any specific questions about the product, please complete the form below or chat directly with our team of advisors.
    We are happy to be there for you on all channels!

    Manuel Knaus

    Manuel Knaus

    Beratung + Verkauf
    Handel und Zuschnitte
    T +49 821 279 79 – 030 E m.knaus@batz-burgel.de

      I would like to contact Batz+Burgel GmbH and agree that my data may be used to process my request and to contact me and that my data and any additional information, documents or files that may have been made available may be stored for the period of time necessary for this purpose. I acknowledge that further information on the subject of data protection can be found in the data protection declaration (click here) and agree to the statements and regulations made there. I acknowledge that I can revoke this agreement at any time and that my revocation will only have legal effect for the future after revocation.

      No file selected (.PDF, .DOC, .JPG, .PNG, .BMP, .DXF, .DWG, .STEP, .STP)

      Request via WhatsApp

      Send us your sketch via WhatsApp at: +49 (0) 151 644 43217